Denali Light Kit BMW R1200/R1250 GS L1 — Counties Honda Skip to content
https://whitespower-images-upper.s3-ap-southeast-2.amazonaws.com/ALL/DENALI/DELKBMW001L1.JPG

Denali Light Kit BMW R1200/R1250 GS L1

by Denali Lighting
SKU DELKBMW001L1
Sold out
$1,845.70 - $1,845.70
$1,845.70
$1,845.70 - $1,845.70
$1,845.70

This convenient Denali lighting kit combines several high-quality Denali components including a wiring harness, light mount, and lights. It's designed to give you everything you need to equip your machine with an improved lighting setup and illuminate your riding experience.

Kit contains:

1x DENALI CANSMART GEN2 CONTROL - BMW (SKU: DEDNLWHS11602)

1x DENALI AUX LIGHT MOUNT BRKT BMW R1200GS LC '13-/R1250GS '19- (SKU: DELAH0710401)

2x DENALI D3 LED DRIVING LIGHT - DATADIM™ TECHNOLOGY - SINGLE (SKU: DEDNLD3050)

 

DENALI CANSMART GEN2 CONTROL details:

Harness the flexibility and intelligence of your BMW motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW's existing handlebar switches or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

  • High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
  • ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
  • Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
  • Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
  • Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
  • Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergencies.
  • Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
  • Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
  • Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
  • Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
  • Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
  • Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
  • Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
  • On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

  • CANsmart™ Controller
  • (x2) 5.5ft Light Extension Cables
  • 5ft SoundBomb Horn Extension Cable
  • B6 Brake Light Wiring Adapter
  • Zip-ties
  • Adhesive Hook-and-Loop Fastener
  • Micro USB Programming Cable

 

DENALI AUX LIGHT MOUNT BRKT BMW R1200GS LC '13-/R1250GS '19- details:

DENALI Motorcycle Specific Fairing / Fender Mounts are available for most ADV, Cruisers and Sport Touring Models Laser cut and powder coated steel brackets either position the lights in the optimum location just below to the outside of the headlight, or create a two-point fender mount strong enough to mount our largest lights to your fender.

 

 

DENALI D3 LED DRIVING LIGHT - DATADIM™ TECHNOLOGY - SINGLE details:

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod.The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitors' lights that are twice its size.

Features

  • TriOptic™ Lens System (includes spot and hybrid lenses with each pod)
  • High-Intensity Series Cree LEDs outputting 2100 lumens per pod
  • DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)
  • DrySeal™ Submersible Waterproof light can withstand the most extreme environments
  • Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
  • LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
  • Low profile mounting bracket with stainless steel hardware included

Specs

  • Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
  • LED: (3x) 11 Watt Cree XP-P LEDs
  • Power Draw: 36 Watts (3 Amps)
  • Lumens: 2100
  • DataDim™ Compatible: Yes
  • Operating Voltage: 9-32V DC
  • IP67 Waterproof & Submersible